Turn the dials. Every needle on this console is driven by the formulas printed beside it, and the instrument that would measure them, a reference instrument offered as a design study, sits in the same chain of state, so what you feel under your hand is the mathematics of a metric that carries a scale factor. Built for physics students who learned relativity the usual way and want to know what changes when the ruler itself becomes a field. The framework is Norbert Schwarzer's; the reduction to these instruments is the companion paper's, and each instrument says where it simplifies.
Errata: Clock readings corrected October 2026; papers revision pending review. New, November 2026: the field equation and what the satellite clocks show; the phase of f.
Take the metric you know and multiply it by a function of a scalar field f. The physical metric becomes
F multiplies the metric tensor, not its determinant, so it is a conformal factor: a proper length scales as √F, a frequency as 1/√F, whatever the dimension. The determinant picks up one factor of F for every dimension, G = Fn·g, where, in Schwarzer's notation, g is the determinant of the metric tensor in its covariant form gαβ (essential in curved space-times and any non-Cartesian coordinates) and G that of Gαβ, so a volume scales as Fn/2, and n is the total number of degrees of freedom of the system, not four. Lengths, clocks and colors on this console need no n; anything counted over a volume, an energy, a mass, a brightness, does, and for no system here is n yet known (Dr. Norbert Schwarzer, personal communication, October 2026). The n dials default to 4 as an illustration only. The master dial sets the field amplitude Δf. Turn it and the ruler on the far side of the seam changes; the walker in the viewport keeps taking strides of one proper meter, and you watch how much map each stride covers.
Top: the field you set. Middle: the conformal factor F and the local ruler √F. Bottom: a map in coordinate units with a walker taking strides of one proper meter; the glowing band is the seam. Where F is small the ruler is coarse and a stride covers more map. A step across the seam is the whole idea in one motion.
The physics dials above set the state a seam would need. This is the bench that would measure it. The reference instrument is a design study: a sealed measuring package, 28 × 18 × 9 cm and 4.2 kg, that reads the state of the medium against a locked reference and opens nothing. Its mount carries the same four dials as instrument 01, kept in step both ways, plus a destination preset and a reference dial that turns only when both calibration keys are set. The package reports through a single shielded port, and a measurement checklist decides whether a reading can be trusted.
Design study The substrate, materials and readings below are an engineering fill-in for the exercise. They describe a measuring instrument only and propose no field modification of anything.
In the scaled-metric picture proper time scales as √F exactly as proper length does, in any number of dimensions, so none of the readings below needs the total dimensionality n. The instrument's phase differential between the stored reference and the local field is that ratio. The reference crystal, read as a nitrogen-vacancy diamond lattice, has a zero-field splitting near 2.870 GHz whose position shifts by 1/√F, so the crystal is a direct readout of the seam setting: a city-scale seam (one part in a thousand) moves the line by about 1.4 MHz, a bench magnetometer's job; an intercontinental seam (one part in a trillion) moves it by about 1.4 mHz, an atomic clock's job. The phase-differential sensor array is the weak-measurement channel that reads the ratio without disturbing the reference. The coherent core, on the restricted water–diamond hypothesis, is a coherent domain of structured water, which is the object Schwarzer's equations describe; its residual jitter sets the instrument's noise floor. Because space and time rescale together, a seam gives a clock-rate difference across the boundary, never a displacement in time. The instrument measures and references; it generates nothing, and that is also what the physics says.
Status of this page: design study, offered as an exercise. It describes a measuring instrument and proposes no field modification of anything.
Hover a bay in the 3D view to see its material. The NV-diamond choice is what ties the box to the dial physics: its reference line shifts as 1/√F, so the crystal reads the seam setting directly.
The paper's claim about the three orbs is a claim about time series: a triad held at a non-extremal point of the action should jitter in a structured way, a control loop should jitter like noise, and a keyed animation should hardly jitter at all. Recurrence quantification analysis, the method Dr. Charles Jorgensen, former Chief Neuro Scientist at NASA Ames, applied to pilots' heart-rate variability, tells the three apart without any model of the forces. Embed the series with Takens' delay (dimension m, lag τ), mark every pair of states that fall within a radius of each other, and read the texture of the plot: diagonal lines are determinism, vertical lines are laminar dwelling.
Analysis note, §R2 The three presets reproduce Figure R1 of Recurrence and the Seam with 400 frames. Paste a spacing residual (one number per frame, any separator) to analyze a tracked triad. Read the false-nearest-neighbor bars first: the embedding dimension where they fall below 5 %, or level off below 10 % for a noisy record, is the number of coordinates the record needs, a lower bound on the total degrees of freedom n in Schwarzer’s scaled metric, not a count of them. Tracked positions come in whole pixels, so many frames share identical values; the test looks past exact duplicates to the nearest distinct state. The dots beside the bars are Kononov’s prediction-based version of the test from Visual Recurrence Analysis (white noise sits near 50 %), and the suggested delay is the first minimum of mutual information, or 1 when successive frames are already nearly independent.
Left: the series and its false-nearest-neighbor curve (bars, Kennel's first criterion; dots, Kononov's test). Bottom: close returns, the share of frames that come back within the radius after each lag, so a rhythm in the jitter shows as a peak at its period; a main return is named only when its peak stands well above the typical level. Right: the recurrence plot, time along both axes, a dark pixel where the triad revisits a state. A control loop gives speckle, a non-extremal residence gives short diagonals inside laminar blocks, a keyed animation gives one unbroken diagonal family. The paper's test (§R2.1) is the pasted record's determinism and laminarity against a hundred shuffled surrogates, not the readouts alone. Comparing a record with the same source's own stored reference, rather than with a population, has precedent in Jorgensen's own patents on heart signals (U.S. 8,489,181, 2013, and U.S. 8,924,736, 2014, with S. V. Dusan and colleagues; assigned to NASA), which verify a person against a reference built from that person's own heartbeats.
Jorgensen's bio-oscillator architecture builds computation from coupled oscillators that fall into stable phase patterns. Three identical oscillators coupled through the sine of their phase differences have two attractors: with attractive coupling (K > 0) they collapse to a single phase; with repulsive coupling (K < 0) they spread to the splay state, equal separations of 120°, and return to it after a disturbance with relaxation rate |K|/2. The triad's spacing is therefore the signature of a repulsively coupled three-oscillator system, and the dial below is the paper's Figure R2 made live.
Lock threshold Give the three oscillators different natural frequencies with the spread knob. Below a critical |K| the separations lean away from 120° and one pair eventually slips: the breaking route of Figure R4. With Δω = 0.12 the full lock needs |K| ≈ 1.0.
Left: the three oscillators on the unit circle. Right: the three separations over the last minute, the dashed line at 120°. Turn K positive and watch the triad collapse to a point; add frequency spread at weak coupling and watch the lock break. Compare with the paper's reading of the heart as a measuring oscillator: the heart tells you when the lock has been held; it does not supply the coupling.
The scaled metric Gαβ = F·gαβ rescales every length and every duration by the same factor, √F, whatever the number of degrees of freedom; only volumes, through G = Fn·g, depend on n, and nothing in this test uses a volume. Seen from the near side, a process on the far side of a seam runs at a different clock rate, slower or faster by the ratio r, and nothing else about it changes. That is a strong, testable claim, and Jorgensen’s recurrence methods are exactly the tools that can test it. Unfold the same process recorded on each side of the seam with Takens’ delay embedding and compare two kinds of quantity. Scale-carrying quantities, which are counted in samples (the embedding delay τ, the recurrence return time, the trapping time, the dominant period), must all stretch by the same factor r. Shape quantities, which describe the geometry of the hidden attractor (the embedding dimension m, the correlation dimension D₂, determinism, laminarity, and the sharpness of the dominant scale), must not change at all.
Dominating scales. Jorgensen opened his pilot paper with the line “An important problem in the study of complex systems is early detection of change.” Away from a transition a system has a dominating scale: here, a dominant period Tdom and the time Tenv over which its rhythm stays coherent. Approaching a transition the recovery slows and the coherence time grows, so the dominant scale sharpens; at the transition itself no single scale dominates. The ratio Q = π Tenv/Tdom is a ratio of two times, so a seam cannot change it, while a system nearing a transition raises it. That gives the test a third verdict. A pure seam stretches every scale by r and leaves Q alone. Changed dynamics alters the shape or brings in a different period. A system nearing a transition keeps its period but sharpens it.
Why this matters If the scale-carrying quantities agree on one r and the shape quantities hold, the change across the boundary is a pure change of ruler, which is what the framework says a seam is. If the shape changes, something other than the ruler changed. If only Q rises, the process is approaching a transition, and the earlier that is caught, the better. For the reference instrument (design study), the first is a clean reading, the second a fault and the third a warning. Choose dynamics changed or nearing a transition to see the other two verdicts. Chaotic Lorenz flow has no dominating scale; for it the Q check is reported as not applicable, which is itself the information. This is an exercise, not a finding.
Top left: the same stretch of the process recorded on each side at the same sampling rate; the far side needs r times as many samples to cover it. Bottom left: the autocorrelation of each record, with lag measured in that side’s own dominant period. Under a pure seam the two envelopes lie on top of each other; nearing a transition the far envelope decays more slowly. Right: each measure as a ratio far/near. Scale-carrying measures should sit on the gold line at r, shape measures on the green line at 1. Below the ratios, two of them come from TESPAR coding, the British zero-crossing method Jorgensen built his display work on: each stretch between zero crossings is an epoch with a duration D and a shape count S. To keep noise from inventing crossings and bumps, the bench smooths each side over a quarter of its own delay, crosses zero only beyond ±0.1 of the spread, and counts only bumps deeper than 0.15 of the spread; all three are scale-free, so a pure seam leaves S alone. The pair is used only when both sides hold at least 50 epochs. Bottom: visual coding, each side drawn as its own closed loop, the signal against itself a quarter of its own dominant period later, shaded by how often the loop passes each point over the whole record. A pure seam leaves the figure unchanged, a transition hollows it into a ring, and changed dynamics reshape it. The view is built in the direction of Jorgensen’s work on visual coding of signals for displays (C. Jorgensen and S. Sharma, and S. Sharma and C. Jorgensen, Proceedings of MSV 2009, CSREA Press, pp. 307–313 and 293–299; NASA Tech Brief ARC-16386-1, 2014, on visualizing analog signals to identify changes or faults) and does not reproduce the method of those papers. In 270 trials across four processes, six random seeds and r from 1 to 4 (closeness k = 3 for the transition cases), 267 verdicts were correct; two pure seams read as changed and one raised an early warning. After the TESPAR measures were added, a retest of 216 trials (four processes, three conditions, r = 1.25 to 4, three seeds) gave 209 correct verdicts, the same number as without them: the heart-like rhythm at r = 1.25 read as changed in all three seeds, and one pure seam raised an early warning. The TESPAR pair is an independent cross-check that needs no embedding, not an improvement in accuracy. A firm transition verdict needs the dominant scale to sharpen by ×1.8, which comes once the recovery time has roughly doubled (k ≈ 2). The early-warning tier (×1.45 to ×1.8) catches it sooner; for the noisy rhythm, about one pure-seam run in ten trips it. After Jorgensen, recurrence analysis of pilot heart-rate variability. The dominating-scale check follows a suggestion by Dr. Norbert Schwarzer (personal communication, October 2026), who pointed to the existence of dominating scales and to C. Domb and M. S. Green, eds., Phase Transitions and Critical Phenomena, Vol. 6 (Academic Press, 1976). Dr. Schwarzer has not reviewed this instrument. See also Scheffer et al., “Early-warning signals for critical transitions,” Nature 461 (2009): 53–59, and the Unfolding Bench.
In the scaled-metric field equations the dimension number appears explicitly, and it is the total number of degrees of freedom of the system, not four. As n grows, the term nonlinear in the gradient of f gains weight while the curvature terms recede (the framework's account of why gravity is weak), the exponent 4/(n−2) shrinks so the scale factor answers less to f, and the action's offset from its extremum, the ever-jittering fulcrum, fades toward the classical stationary principle.
Schematic Weights are drawn as gradient ∝ n, curvature ∝ 1, fulcrum offset H ∝ 1/n. These are the trends the framework states; the exact coefficients are in the source text.
Watch the bead. At low n it rides high on the slope and jitters; at high n it settles into the extremum and the wobble fades. That is the classical limit arriving under your hand.
An earlier version of this caption said a strong scale response wants small n while weak gravity wants large n. That holds for lengths only. Because the scaling acts on the metric tensor, the determinant carries Fn, and a volume answers to the field with exponent 2n/(n−2) in (Cf + f), which tends to 2 and never fades (gold curve). Turn the dial: length effects weaken with n, volume effects do not, so the two demands need not collide. What a volume effect actually is still waits on the total number of degrees of freedom of each system, which is not yet known for any of them. After a correction by Dr. Norbert Schwarzer (personal communication, October 2026).
The Casimir energy density between plates a distance d apart falls as d−4 and is measured to about a percent between 0.1 and 6 µm. A 30 m Morris–Thorne throat needs about 3.2 × 1040 J/m³ of negative energy over its own volume. If vacuum energy is scale-dependent, the dependence must stay hidden where Casimir is measured and switch on above it. Set the onset and the exponent and see whether the gap closes.
The shaded band is where Casimir has been measured; any trial law must sit on the textbook line there. The instrument does not claim the vacuum does this. It shows what it would have to do, which is a question a laboratory can put at tens to hundreds of micrometers.
Conservation of angular momentum for a triad of fixed mass gives ω ∝ r−2 in a torque-free collapse. If the effective mass carries a factor of the scale factor, meff ∝ F(r)q with F ∝ rp, the rule becomes ω ∝ r−(2+qp). A mass is counted over a volume, so q is set by the total number of degrees of freedom of the system through the volume factor Fn/2, and it need not vanish at large n; the fit measures only the product qp. A keyed animation most naturally holds ω constant. The bench generates a track with a hidden exponent and tracking noise; fit it by hand, then reveal.
Rev. 10.2 · after Bocker [40] The exponent is a statement about the rotational part only. A collapse at finite rate also has a radial velocity ṙ, which the fit never sees and the footage must supply directly: |v|² = ṙ² + h²/r². If the plane is tilted by β the invariant is r²θ̇(1 + cos²β) rather than r²ω (branch bench, 04·B). A failure of the material relation demotes the material-body reading; it does not reject the geometry.
Left: ω/ω0 against r/r0 on log axes, so a power law is a straight line with slope −k. Right: the triad at the current frame. The same measurement on real footage is the sharpest test the companion paper proposes, and it needs no absolute scale.
Revision 10.2 of the companion paper (carried forward into Revision 10.3), following Nathanael J. Bocker's formal review, splits the old toroidal perturbation into two branches that had been written as one. With a common poloidal phase (Equation 5) the three vertices ride one torus, the triangle stays exactly equilateral with side √3ρ(t), and the plane breathes along the flight axis. A rigid tilt (Equation 5b) carries the body-frame triangle by a rotation matrix, so equal sides and the centroid are exact for any tilt or precession, but the vertices need not lie on one torus. The staggered-phase construction of Revision 10.1 is kept here as the superseded case so you can see why it failed: the sides spread and the centroid wanders.
Rev. 10.2 · after Bocker [40] The readouts are the invariants his 10,000-state stress test checked: side-length spread, centroid offset and torus residual. The last readout is the tilted angular-momentum factor that replaces the planar invariant in the spin-up test when the plane leans.
Left: the triad seen along the flight axis. Middle: from the side, flight axis horizontal, the tilted plane visible as a leaning chord. Right: the three side lengths over the last ten seconds against √3r. Only two of the three branches keep the sides equal; only one keeps the vertices on the torus. The paper's discriminator (§6, §8): equal sides through a tilt select GR; a common axial displacement obeying the torus relation selects GT; neither is a non-rigid alternative.
Choose a route and the console works it through every instrument on this page and on the Unfolding Bench, then writes the result up as a short report you can download as a PDF. Each report separates three kinds of statement: what the line element fixes outright (the stride ratio, the walker’s time and the world’s, the window’s redshift), what depends on the total number of degrees of freedom n (how finely the field must be set), and what cannot be computed until n is known (anything counted over a volume: energy, mass, brightness). It then lists the checks the tools can already run for that route, and says plainly where a route lies outside what they have been tested on.
Exercise, not a finding No seam has been produced or observed. A report says what the scaled-metric reading would imply for a route, as a design study; it is not a plan and makes no claim that such a crossing is possible. The framework is Dr. Norbert Schwarzer’s; he has not reviewed these reports, and any error in them is the author’s.
The preview shows the report exactly as it will be saved, one page at a time. Distances are surface to surface: great-circle for routes on Earth, and the Earth–Moon and Earth–Mars ranges for the others, where the stride ratio must be set for the distance on the day. The corridor is the proper length walked inside the seam, and the dwell is the time spent at the destination, which is ordinary space, so it adds no clock offset of its own; the offset comes from the crossing, during which the world’s clocks run ρ times faster than the walker’s.
The master dial sets the scale factor by hand. Schwarzer’s field equations say it cannot be set by hand. Under his weak-gravity condition, where the variation of the metric is dominated by pure rescaling, the scaled-metric field equations reduce to a single wave equation for f (Fluid Universe, section 5.6.1, equations 174–176):
That is the Klein–Gordon equation, with the background curvature R playing the part of a mass term; Schwarzer obtains mass and potentials from additional dimensions. Three consequences follow for this console. First, f is a wave field: a region of changed F must be produced and held by a source, and Schwarzer’s own picture (November 2026) is a compact source whose influence arrives as superposed plane waves. Second, the clock effect of a given change in f falls as about 1/n; in his words, as n grows “the quantum fluctuation caused by the wave function f and thus, F[f] disappears.” Third, in four-dimensional general relativity a static wall of changed F in empty space is not a solution at all: the only vacuum solution with F varying across a plane is constant F, and every wall profile requires negative energy density on one side. The two instruments below put numbers on both points, and the panel beneath them sets them against what GPS satellite clocks have actually measured.
Exercise, not a finding The negative-energy result is standard four-dimensional general relativity applied to Gαβ = F·gαβ. Whether Schwarzer’s extra-dimensional terms can act as an effective negative energy in four dimensions is an open question put to him; he has not reviewed this section.
What his published papers add (November 2026). A reading of the 48 papers Schwarzer has made freely available (siomec.com) sharpens four points. First, n is not one universal number: he writes that “all degrees of freedom of a physical system … are just dimensions,” and that n “for certain systems” is set by an extremal principle, so two kinds of clock need not share the same n or respond identically. Second, his solutions for f are complex, with a particle at rest carrying f ∝ e±i·mc²t/ħ; a field with a phase can in principle carry quantized vortices, as a superfluid does. Third, he treats electromagnetic potentials as additional dimensions; in theories of that kind, changing the extra dimensions changes the strength of electromagnetism, which rubidium and cesium clocks feel differently. That is the route by which the clock-type searches below could see his field. Fourth, in his published equations the cosmological constant Λ is a plain constant; a prediction for dark energy that changes over time, which DESI’s three-year data hint at, has not yet appeared in his free papers.
Energy from the Einstein tensor of F(x)·η for a tanh wall: peak negative density ≈ (c⁴/8πG)·(r² − 1)·0.385/d², with c⁴/8πG = 4.8×10⁴² J/m³ per m⁻². Casimir density for ideal plates at 1 nm: −π²ħc/(720 a⁴) ≈ −4×10⁸ J/m³; water’s rest energy is 9×10¹⁹ J/m³ and nuclear matter’s about 2×10³⁴ J/m³.
| Search | Signal looked for | Result | Limit |
|---|---|---|---|
| Universal wall | Every clock steps by the same amount as a wall sweeps the constellation | No detection; apparent events were reference-timescale jitter | ε·d < 1.3, 5.9, 39 µm at 100, 300, 1,000 km/s |
| Clock-type wall | Different clock designs step by different amounts | No detection; one candidate (9 Feb, 20:41 UTC) failed the geometry and same-type tests | Type difference in ε·d < about 11 µm at 300 km/s |
| Plane-wave oscillation | A coherent oscillation that clock designs feel differently | No unexplained spectral line; all strong lines sit at orbital, sidereal-day or solar-day harmonics | Fractional frequency amplitude ≈ 7×10⁻¹⁵ (10–60 min periods), 1.3×10⁻¹⁴ (70–600 s); for a wave field these periods correspond to masses of about 10⁻¹⁸ to 6×10⁻¹⁷ eV, the ultralight dark-matter range |
| Light-speed wall | A wall moving at the speed of light reaches every satellite within one 30-s sample, so only differences between clock types survive | No detection; the three loudest events traced to one satellite, to satellites of one type disagreeing, and to a group-wide shift of the Block IIR clocks; that shift is confirmed by two independent analysis centers (ESA, GFZ) but recurs at the same sidereal time every day, so it is tied to orbital geometry, not to a passing wall | Type difference: step < 60 ps (ε·d < about 2 cm); lasting rate change < 1×10⁻¹³ |
A quantum wavefunction is complex. Its real and imaginary parts trace a rotating helix, and that helix is a picture of the phase, not of a particle: experiments only ever see |Ψ|², the probability. Schwarzer identifies his field f with the wavefunction. In his solutions a particle at rest carries f ∝ e±i·mc²t/ħ, the same helix.
The difference is where f lives. In quantum mechanics, experiments never see the overall phase — only the probability |Ψ|² — so that phase is treated as a convention in the math, not something a clock would feel. In the scaled metric, F = (Cf + f)4/(n−2) multiplies the metric itself, so a physical phase would rotate the geometry of space and time. Switch between the two readings below and watch what a clock would do.
Left: f = |f|eiθ drawn along time as a helix, its real part (red) and imaginary part (blue) projected below. Middle: F = (1 + f)4/(n−2) on the complex plane; ordinary geometry lives on the positive real axis. Right: the clock rate 1/√F over the last cycles. Under the convention it follows |F| only; under geometry its real part can pass through zero, the “G = 0” moments of Schwarzer's post of 29 October 2026.
Exercise, not a finding The test for allowed complex metrics is the criterion of Kontsevich and Segal, discussed by Witten (2021): written in a real basis, the phases of the metric's entries must sum to less than π. Ordinary spacetime sits exactly on the boundary (π for time, 0 for space). A common phase Φ on every entry gives π + (n−2)|Φ|, so only Φ = 0 is allowed. Whether Schwarzer's framework accepts that criterion is an open question put to him; he has not reviewed this panel.
With Gαβ = F·gαβ, show that proper lengths scale as √F and frequencies as 1/√F in any number of dimensions, and that G = Fn·g, so an n-volume scales as Fn/2. Then turn the master dial to a seam with Ffar/Fnear = 4 and confirm the readouts.
A seam is set so that one proper meter on the far side spans ten kilometers of near-side map. What ratio Fnear/Ffar is needed, and with n = 4, Cf = 1, what Δf? Can the dial reach it?
On the dimension dial, find the smallest n at which the gradient term outweighs curvature 10:1, and the exponent there. Then find the n at which the exponent drops below 0.2. Why does the companion paper call this a tension?
On the scale test, set the onset to 1 µm and find the exponent that closes the gap. Why is that excluded, and what onset does the companion paper adopt?
Generate five tracks at 4 % noise and 24 frames. Fit each by hand, then least-squares, then reveal. How often can your hand tell k = 2 from k = 2.5? Repeat at 12 % and 8 frames.
Using the master dial, explain why a domain wall in f needs no negative energy, and why the same framework makes a curvature throat harder rather than easier.
On the recurrence bench, read DET and LAM for the three presets at m = 3, τ = 4, radius 0.6σ. Which two measures separate the non-extremal residence from the control loop, and why does Lmax alone identify the keyed animation?
On the splay-state lock, set Δω = 0.12 and lower |K| from 1.5 in steps of 0.1. Record the largest deviation from 120° at each step. Where does a pair slip, and how does that compare with the paper's threshold?
On the branch bench, set a/r = 0.1 and compare the three branches. Which keep the sides equal, which keep the vertices on the torus, and why did Revision 10.1's staggered-phase construction fail as a rigid triad?
Set GR with β = 45°. By how much does the invariant factor differ from the planar case, and what error would a planar fit of ω r² make if the plane were really tilted this far? Why does the collapse bench now report ṙ separately?
In the seam invariance test (01·F), choose the heart-like rhythm with r = 2, first with same dynamics and then with dynamics changed. Read the TESPAR check and compare the three glyphs at the bottom. Then choose the chaotic Lorenz flow. Why does the TESPAR pair vote for the heart-like rhythm but not for Lorenz, and why does the bench smooth each side over a share of its own delay before coding?
A seam is set so that a 10 m corridor spans the 8,819 km from Los Angeles to Tokyo, and a traveler walks it at 1.4 m/s. How long does the walk take on the traveler’s watch, and how much time passes in Tokyo meanwhile? Is the seam a shortcut?