Sunlit instrument console · companion to “The Scaled-Metric Reading”

Scaling Field Dial

Turn the dials. Every needle on this console is driven by the formulas printed beside it, so what you feel under your hand is the mathematics of a metric that carries a scale factor. Built for physics students who learned relativity the usual way and want to know what changes when the ruler itself becomes a field. The framework is Norbert Schwarzer's; the reduction to these instruments is the companion paper's, and each instrument says where it simplifies.

drag a dial to turn it · scroll over it for fine steps · arrow keys when focused
01

The master dial: one medium, a ruler you can re-set

Take the metric you know and multiply it by a function of a scalar field f. The physical metric becomes

Gαβ = F[f] · gαβ,    F[f] = (Cf + f)4/(n−2)

F multiplies the whole metric, so it is a conformal factor: a proper length scales as √F, a frequency as 1/√F. The master dial sets the field amplitude Δf. Turn it and the ruler on the far side of the seam changes; the walker in the viewport keeps taking strides of one proper metre, and you watch how much map each stride covers.

F near / far
—
conformal factor each side
Stride on far side
—
map metres per proper metre, √(Fnear/Ffar)
Frequency ratio
—
νfar/νnear = √(Fnear/Ffar)
Exponent 4/(n−2)
—
how hard F answers to f
Window colour
—
light arriving from the far side

Top: the field you set. Middle: the conformal factor F and the local ruler √F. Bottom: a map in coordinate units with a walker taking strides of one proper metre; the glowing band is the seam. Where F is small the ruler is coarse and a stride covers more map. A step across the seam is the whole idea in one motion.

02

The dimension dial: n as a coefficient, not a stage

In the scaled-metric field equations the dimension number appears explicitly. As n grows, the term nonlinear in the gradient of f gains weight while the curvature terms recede (the framework's account of why gravity is weak), the exponent 4/(n−2) shrinks so the scale factor answers less to f, and the action's offset from its extremum, the ever-jittering fulcrum, fades toward the classical stationary principle.

Schematic Weights are drawn as gradient ∝ n, curvature ∝ 1, fulcrum offset H ∝ 1/n. These are the trends the framework states; the exact coefficients are in the source text.

Watch the bead. At low n it rides high on the slope and jitters; at high n it settles into the extremum and the wobble fades. That is the classical limit arriving under your hand.

Gradient : curvature
—
relative weight (schematic)
Exponent 4/(n−2)
—
→ 0 as n → ∞
F for Δf = 1.5
—
with Cf = 1
Fulcrum offset H
—
relative to n = 3

The tension the companion paper reports is under your fingers: a strong scale response (large exponent) wants small n; weak gravity (small curvature weight) wants large n. Turn the dial and watch one improve as the other worsens.

03

The scale test: what the vacuum would have to do

The Casimir energy density between plates a distance d apart falls as d−4 and is measured to about a percent between 0.1 and 6 µm. A 30 m Morris–Thorne throat needs about 3.2 × 1040 J/m³ of negative energy over its own volume. If vacuum energy is scale-dependent, the dependence must stay hidden where Casimir is measured and switch on above it. Set the onset and the exponent and see whether the gap closes.

ρCas(d) = π²ħc / 720d4,   ρreq = (r0c4/G) / (4πr03/3)
—
ρ at onset
—
J/m³, from the Casimir law
ρ reached at r₀
—
J/m³, on your trial law
ρ required
—
J/m³, throat energy / volume
p that closes it
—
for this onset and r₀

The shaded band is where Casimir has been measured; any trial law must sit on the textbook line there. The instrument does not claim the vacuum does this. It shows what it would have to do, which is a question a laboratory can put at tens to hundreds of micrometres.

04

The collapse bench: fit the exponent from a track

Conservation of angular momentum for a triad of fixed mass gives ω ∝ r−2 in a torque-free collapse. If the effective mass carries a factor of the scale factor, meff ∝ F(r)q with F ∝ rp, the rule becomes ω ∝ r−(2+qp). A keyed animation most naturally holds ω constant. The bench generates a track with a hidden exponent and tracking noise; fit it by hand, then reveal.

Lx = 3 meff(r) r² ω = const  ⇒   ω/ω0 = (r/r0)−k,  k = 2 + qp
Hidden exponent drawn from {0, 1.5, 2, 2.5}.
RMS residual
—
in log ω, your fit
Interpretation
—
what your k would mean
Wing station
0.73 r₀
r must stay above 30.5 m

Left: ω/ω0 against r/r0 on log axes, so a power law is a straight line with slope −k. Right: the triad at the current frame. The same measurement on real footage is the sharpest test the companion paper proposes, and it needs no absolute scale.

Problem set

Six exercises that use the console

1. Conformal bookkeeping

With G = F g, show that proper lengths scale as √F and frequencies as 1/√F. Then turn the master dial to a seam with Ffar/Fnear = 4 and confirm the readouts.

Worked answer
ds² = Gαβdxαdxβ = F gαβdxαdxβ, so a spatial interval has proper length √F times its g-length and a proper time √F times its g-time; frequency is inverse time and scales as 1/√F. With Ffar/Fnear = 4 the far-side stride is 0.5 map metres and the frequency ratio 0.5: a redshift. On the console: n = 4 (exponent 2), Cf = 1, Δf = 1.

2. The map with two scales

A seam is set so that one proper metre on the far side spans ten kilometres of near-side map. What ratio Fnear/Ffar is needed, and with n = 4, Cf = 1, what Δf? Can the dial reach it?

Worked answer
Stride 104 needs Fnear/Ffar = 108, so Ffar = 10−8: (1+Δf)² = 10−8, Δf = −0.9999. The dial stops at −0.9 (Ffar = 0.01, stride 10). Figure S0 in the companion paper is a cartoon of the idea, not a setting the instrument reaches, and the framework does not fix how far Δf can be driven.

3. Two demands on one dial

On the dimension dial, find the smallest n at which the gradient term outweighs curvature 10:1, and the exponent there. Then find the n at which the exponent drops below 0.2. Why does the companion paper call this a tension?

Worked answer
On the schematic weights, 10:1 is n = 10, exponent 0.5. The exponent falls below 0.2 at n = 22. A strong scale response, which a large seam wants, favours small n; suppressed curvature, which the weak-gravity argument wants, favours large n. Whether f can vary steeply enough at large n to compensate is the open question the paper records.

4. Where the vacuum may not turn

On the scale test, set the onset to 1 µm and find the exponent that closes the gap. Why is that excluded, and what onset does the companion paper adopt?

Worked answer
At a 1 µm onset the required exponent is about 5.9, but 1 µm sits inside the band (0.1–6 µm) where the d−4 law is confirmed to about a percent. The paper puts the onset above about 10 µm, where the thermal (Lifshitz) regime makes the prediction delicate and measurements are few, and finds p ≈ 7.4 from there to 30 m: a rise as roughly the seventh power of scale, against the fourth-power fall Casimir predicts.

5. Fit an exponent

Generate five tracks at 4 % noise and 24 frames. Fit each by hand, then least-squares, then reveal. How often can your hand tell k = 2 from k = 2.5? Repeat at 12 % and 8 frames.

Worked answer
At 4 % and 24 frames the two separate nearly every time: over a collapse to 0.73 r0 the curves differ by about 15 % in ω, several times the noise. At 12 % and 8 frames they do not. That is the practical content of the paper's §16.1: the test is only as good as the tracking, and the code must be published with the result.

6. What a seam is not

Using the master dial, explain why a domain wall in f needs no negative energy, and why the same framework makes a curvature throat harder rather than easier.

Worked answer
The wall is the region of width ℓw where f changes; its energy is gradient energy, ∝ (Δf)²/ℓw per unit area, and positive. Nothing is held open against curvature; the metric on each side is ordinary, only scaled. A Morris–Thorne throat is sustained by curvature, and the dimension dial shows curvature terms losing weight as n grows; the same suppression that weakens gravity weakens spacetime's response to any stress-energy, negative included.